Cambium Networks 3GHz 450b High Gain Radio
Capable of up to 300Mbps Aggregate in a 40MHz Channel
SKU
C030045B021A
Weight
1.15 lb
Stock Quantity
Call for availability
The 3GHz 450b Subscriber and Backhaul Module brings increased performance within the Cambium Networks 450 platform.
It is capable of up to 300Mbps aggregate in a 40MHz channel and can function as a point to point (PTP) link or as a Subscriber Module (SM). The 3GHz 450b is an ultra-wide band radio that functions in the 3.3GHz to 3.9GHz frequency range.
Product Features- Gigabit Ethernet Interface provides the maximum transfer rates to the device
- 3.5mm audio jack allows direct connection of headphones for alignment without any adapters
- New System on a Chip (SoC) enhances Packet Processing Power more than 4x that of the 450 SM
- CBRS CBSD Category B device
- 2x2 MIMO OFDM
- Ethernet Interface: 100/1000 BaseT, full duplex, rate auto negotiated, 802.3 compliant
- Network Management: IPv4/IPv6 (dual stack), HTTP, HTTPS, Telnet, FTP, SNMPv2c and v3, Cambium Networks cnMaestro
- Radio only
- 4-pack antenna assembly: N030045D001A
- PoE injector and line cord: N000900L001D and WC-N000900L007A
- Optional glands to enhance to IP67: N000000L135A
- Optional radome: N000900L021A
| Interface | |
| MAC (Media Access Control) Layer | Cambium Networks proprietary |
| Physical Layer | 2x2 MIMO OFDM |
| Ethernet Interface | 100/1000 BaseT, full duplex, rate auto negotiated, 802.3 compliant |
| Protocols Used | IPv4, IPv6, UDP, TCP/IP, ICMP, Telnet, SNMP, HTTP, FTP |
| Network Management | IPv4/IPv6 (dual stack), HTTP, HTTPS, Telnet, FTP, SNMPv2c and v3, Cambium Networks cnMaestro |
| MTU | 1700 bytes |
| VLAN | 802.1ad (DVLAN Q-inQ), 802.1Q with 802.1p priority, dynamic port VID |
| Security | |
| Encryption | FIPS-197 128-bit AES, 256-bit AES (Requires Optional License for attached Access Point) |
| Performance | |
| PPS | 50,000 |
| ARQ | Yes |
| Ultimate Sensitivity | -94 dBm |
| Maximum Deployment Range | Up to 64 km (40 miles) in PMP mode, up to 200 km (124 miles) in PTP mode |
| Latency | 3 - 5 ms, typical |
| GPS Synchronization | Yes, synchronized by Access Point or via 3.5mm port using cnPulse (for PTP mode) |
| Quality of Service | Diffserve QoS |
| Physical | |
| Antenna Accessories | Optional Radome: N000900L021A |
| Surge Suppression | EN 61000-4-5: 10x700 ?s, 4 kV, EN 61000-4-2: ESD 30 kV contact / 30 kV air |
| Mean Time Between Failure | 40 Years |
| Environmental | IP55; Optional glands to enhance to IP67 - Part number N000000L135A |
| Temperature / Humidity | -40°C to 60°C (-40°F to 140°F), 0-95% non-condensing |
| Weight | 3.1 kg (7 lb) (includes mounting bracket) |
| Dimensions (Diameter x Depth) | 45 cm x 28 cm (17.8 in x 11.2 in) |
| Pole Diameter Range (w/ included mount) | 2.5 cm to 7.6 cm (1 in to 3 in) ± 20 degrees mechanical tilt |
| Power Consumption | 12 W typical, 15 W peak |
| Input Voltage | 20-32 VDC, Canopy-style PoE |
| Link Budget | |
| Transmit Power Range | 56 dB dynamic range (to EIRP limit by region) (1 dB step) |
| Maximum Transmit Power | +29 dBm (MIMO, combined polarities) |
| Certifications | |
| ISED Canada | 109W-0053 |
| FCC ID | Z8H89FT0053 |
| ETSI | EN 302 326-2 |
Related Products
SKU DPR-F140
SKU KPPA-J-ARM
Call for availability
SKU KPPA-J-ARM-24-2P
Call for availability
SKU KPPA-J-ARM-39-4P
Call for availability
SKU N030045D001A
SKU N000900L001D
