Cambium Networks 5GHz 450b Retro (FCC)
Can Function as a Point to Point Link or Subscriber Module
SKU
C050045B102A
Weight
2 lb
Stock Quantity
31 USA
The 5GHz 450b Retro from Cambium Networks can function as a Point to Point link or as a Subscriber Module. It functions in the 4.9GHz to 5.925GHz frequency range and is capable of up to 300Mbps aggregate in a 40MHz channel.
Product Features- New System on a Chip (SoC) enhances Packet Processing Power more than 4x that of the 450 SM
- Gigabit Ethernet Interface provides the maximum transfer rates to the device
- 3.5mm audio jack allows direct connection of headphones without any adapters
- Physical Layer Interface: 2x2 MIMO OFDM
- Integrated Antenna Gain: 9dBi
- Frequency Range: 4900MHz - 5925MHz
Spectrum | |
Frequency Range | 4900MHZ - 5925MHz |
Channel Width | 5MHz, 10MHz, 15MHz, 20MHz, 30MHz or 40MHz |
Channel Spacing | Configurable on 2.5 MHz increments |
Interface | |
Channel Access | TDMA/TDD |
Ethernet Interface | (1) 100/1000 BaseT with PoE In |
Ethernet | |
MAC (Media Access Control) Layer | Cambium Networks proprietary |
Physical Layer | 2x2 MIMO OFDM |
Ethernet Interface | 100/1000 BaseT, full duplex, rate auto negotiated, 802.3 compliant |
Protocols Used | IPv4, IPv6, UDP, TCP/IP, ICMP, Telnet, SNMP, HTTP, FTP |
Network Management | IPv4/IPv6 (dual stack), HTTP, HTTPS, Telnet, FTP, SNMPv2c and v3, Cambium Networks cnMaestro |
MTU | 1700 bytes |
VLAN | 802.1ad (DVLAN Q-inQ), 802.1Q with 802.1p priority, dynamic port VID |
Security | |
Encryption | FIPS-197 128-bit AES, 256-bit AES (Requires Optional License for attached Access Point) |
Performance | |
PPS | 50,000 |
ARQ | Yes |
Ultimate Sensitivity | −94dBm |
Maximum Deployment Range | Up to 64km (40 miles) in PMP mode, up to 200km (124 miles) in PTP mode |
GPS Synchronization | Yes, synchronized by Access Point or via 3.5mm port using cnPulse (for PTP mode) |
Quality of Service | Diffserve QoS |
Physical | |
Integrated Antenna Gain | 9dBi |
Azimuth (3 dB rolloff) | 45° |
Elevation (3 dB rolloff) | 45° |
VSWR (MAX) | 2:1 |
Antenna Accessories | Optional Offset Reflector dish: HK2022A - 4-pack -- Enables total gain of 24 dBi |
Surge Suppression | EN 61000-4-5: 10x700 ?s, 4 kV, EN 61000-4-2: ESD 30 kV contact / 30 kV air |
Mean Time Between Failure | > 40 Years |
Environmental | IP55 |
Wind Survival | 200kph (124mph) |
Temperature / Humidity | −40°C to 60°C (−40°F to 140°F), 0–95% non-condensing |
Weight | 0.4kg (1lb) (includes mounting bracket) |
Dimensions (HxWxD) | 28.6cm x 8.9cm x 8.9cm (11.25in x 3.5in x 3.5in) |
Power Consumption | 9W typical, 12W peak |
Input Voltage | 24VDC - 30VDC, Canopy-style PoE |
Link Budget | |
Transmit Power Range | 57dB dynamic range (to EIRP limit by region) (1dB step) |
Maximum Transmit Power | +27dBm (MIMO, combined V+H) (+22dBm at 256QAM) |
Power Control | ATPC (Automatic Transmit Power Control) at system level, all Subscribers implement ATPC |