Mimosa Gigabit Network Interface Device (NID)
Electrostatic discharge protection, exterior wall mounting, and reliable grounding point for installation requiring ethernet cabling
Tariff Fee
SKU
100-00039
Weight
0.36 lb
Stock Quantity
1079 USA | 52 CAN
The Mimosa Gigabit NID is an advanced surge protector and arrestor that provides superior electrical system protection. Its Gas Discharge Tubes (GDTs) are highly efficient and ensure optimal performance and reliability. With a solid grounding point, it's ideal for Ethernet installations that require enhanced protection against electrical surges. The NID is designed for easy exterior wall mounting and is highly accessible for outdoor technicians. Experience the benefits of the Mimosa Gigabit NID, including efficient electrical protection and peace of mind.
Mimosa NID adds extra protection for electrical systems, increasing radio reliability and reducing service calls for WISP operators. It's ideal for areas that need installations to meet specific code requirements.
Easy installation: In just a few minutes, an NID can be mounted, installed, and connected. A shielded CAT6 or 6A ethernet cable goes into the NID, and another CAT6 or 6A ethernet cable goes inside the house or to the bottom of a tower into a PoE injector. A 14 AWG or larger wire goes from the NID and connects to a ground rod.
Main benefits:
- ESD protection between subscriber premise entry and the home
- ESD protection between radios and the power source
- Protects the power source and electrical equipment
- Service interface for easily accessible troubleshooting
- Cost-effective solution for every deployment
| Max Throughput | PTP: 700 Mbps IP PTMP: 700 Mbps IP |
| Wireless Protocols | Mimosa SRS; WiFi Interop |
| Modes | PTP Backhaul; PTMP Client |
| Radio | |
| MIMO and Modulation | 2x2:2 MIMO OFDM, up to 256 QAM |
| Bandwidth | 20/40/80 MHz channels, tunable to 5 MHz increments for Mimosa SRS and WiFi Interop mode |
| Frequency Range | PTP / PTMP: 4900–6400 MHz (restricted by country of operation) |
| Max Output Power | 27 dBm |
| Sensitivity (MCS0) | -87 dBm @ 80 MHz -90 dBm @ 40 MHz -93 dBm @ 20 MHz |
| Power | |
| Max Power Consumption | 9.2 W average; 12.9 W max |
| System Power Method | Passive POE (24-56 VDC) |
| PoE Power Supply | Passive POE compliant, 24-56 V Power over Ethernet supply (not included) |
| Physical | |
| Dimensions | Height: 175 mm (6.89”) Width: 70 mm (2.75”) Depth: 61 mm (2.40”) |
| Weight | 0.4 kg (0.89 lbs) |
| RF Connector Type | Mimosa N5-X twist-on |
| Enclosure Characteristics | Outdoor, die-cast aluminum, UV stabilized paint |
| Mounting | Dual attached pole mount straps |
| Grounding | Ground lug |
| Wind Survivability | 200 km/h (125 mph) |
| Environmental | |
| Outdoor Ingress Protection Rating | IP55 |
| Operating Temperature | -40°C to +55°C (-40°F to 131°F) |
| Operating Humidity | 5 to 100% condensing |
| Operating Altitude | 4,420 m (14,500’) max |
| Shock & Vibration | ETS 300-019-2-4 class 4M5 |
| Regulatory and Compliance | |
| Approvals | FCC Part 15.405 and Part 90Y CE/ETSI |
| EMI/Safety | FCC Part 15 Class B EN 55022 Class B IEC61000 UL/IEC 60950-2 IEC/EN 60905-1 |
| WEEE/ROHS Compliance | Yes |
Related Products
